|
Cable Testers and Harness Testers Made Easy! |
If you've used our Signature™ series products then you know the few simple steps that get you testing cables. The easy-wire™ System uses those same steps to get you testing harnesses.
See how easy the process is for yourself:
| Step 1: Install the easy-wire software on your PC. Connect the tester to your PC. |
|
| Step 2: Get your easy-wire Adapters. |
|
| Step 3: Attach the adapters to your harness board. |
|
| Step 4: Learn your fixturing and harness. |
|
| Step 5: Verify the test against your specs. |
|
| Step 6: Push the Start button to begin testing harnesses! |
|
© Cirris Systems Corp.
easy-wire and Signature are trademarks of Cirris Systems Corp.
easy-wire CR and easy-wire Harness Components are Patent pending.